What is the Receiver Sensitivity for each of the Data Rates ?

I can't find any mention of receiver sensitivity in the specifications.

Would be helpful to know for use in calculations, and comparing with other products.

Comint.

I am unsure at the moment. We will forward the question through to the engineer's.

S.

-83dBm 11Mbit... so i was told,,, i dono how true tho

Any reply from the Engineers about the receiver sensitivity for the 11Mbps, 5.5Mbps, 2Mbps, and 1Mbps datarates on the Minitar AP?

Comint

Just got the reply through now, please see the data below.

Receive Sensitivity (Typical)
-92dBm @ 1Mbps -91dBm @ 6Mbps -82dBm @ 24Mbps
-89dBm @ 2Mbps -90dBm @ 9Mbps -78dBm @ 36Mbps
-87dBm @ 5.5Mbps -87dBm @ 12Mbps -71dBm @ 48Mbps
-82dBm @ 11Mbps -82dBm @ 18Mbps -71dBm @ 54Mbps

Available transmit power
21 ± 2dBm @1, 2, 5.5 and 11Mbps
20 ± 2dBm @6, 9, 12, 18Mbps
17 ± 2dBm @24, 36Mbps
16 ± 2dBm @48, 54Mbps

S

Thanks for detailed reply.

Comint.

plese correct me if im wrong but since when does the MNWAPB do 54Meg
this info is not correct

Just got the reply through now, please see the data below.

Receive Sensitivity (Typical)
-92dBm @ 1Mbps -91dBm @ 6Mbps -82dBm @ 24Mbps
-89dBm @ 2Mbps -90dBm @ 9Mbps -78dBm @ 36Mbps
-87dBm @ 5.5Mbps -87dBm @ 12Mbps -71dBm @ 48Mbps
-82dBm @ 11Mbps -82dBm @ 18Mbps -71dBm @ 54Mbps

Available transmit power
21 ± 2dBm @1, 2, 5.5 and 11Mbps
20 ± 2dBm @6, 9, 12, 18Mbps
17 ± 2dBm @24, 36Mbps
16 ± 2dBm @48, 54Mbps

ahh that would be the firmware people getting their wires crossed. Sorry for that.

Only Pay attention to these ones

Receive Sensitivity (Typical)
-92dBm @ 1Mbps
-89dBm @ 2Mbps
-87dBm @ 5.5Mbps
-82dBm @ 11Mbps

Available transmit power
21 ± 2dBm @1, 2, 5.5 and 11Mbps


These figures should be correct for the MNWAPB

When did the minitar put out 125.9Mw ?

There are the values our engineer's provided. If you think they are incorrect let us know and we will enquire.

S.

i do feel thats wrong consittering the box says +18dbm
thats ~70mw without working out the exact math